Squeeking noise/valve gaskets/leaking oil

Talk about buying cars, fixing them, and everything in between.
User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:
Squeeking noise/valve gaskets/leaking oil

Postby Darkfoxx » Mon May 27, 2013 5:11 pm



Belt? What do you think bumbs... If so, can I replace it or should I take it in?
Gaming:

Workstation:

User avatar
Harness
Da Bumble
Posts:2070
Joined:Mon Dec 10, 2007 6:13 pm

Re: Squeeking noise

Postby Harness » Mon May 27, 2013 6:00 pm

Take it in!

You need to be sure its nothing major. Sounds like a simple belt noise but you need to be safe on this one. Best case scenario, you need a new serpentine belt. Worse case, something else.
I type a bunch of shit then people go fuk themselves

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Mon May 27, 2013 6:11 pm

Aight man thanks much. Hopefully nothing serious...
Gaming:

Workstation:

User avatar
Harness
Da Bumble
Posts:2070
Joined:Mon Dec 10, 2007 6:13 pm

Re: Squeeking noise

Postby Harness » Mon May 27, 2013 6:28 pm

I'll think you'll be fine.
I type a bunch of shit then people go fuk themselves

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Wed May 29, 2013 7:13 pm

So the belt noise is gone. They replaced a bunch of shit:
20130529_184005.jpg
20130529_184005.jpg (1.23MiB)Viewed 10495 times

The tech showed me the deflection pulley and it was fucked. I turned it with my hand and it was like turning a pepper mill. So that's all fixed...gotta love the $149.35 markup on parts.

Now this is what he told me needed to be done:

-VANOS oil line is leaking
-VANOS gasket needs replacing
-Exhaust manifold gasket needs replacing. The shield (?) is rattling on cold start. Once it expands it's fine.

The gasket is #3:
http://www.getbmwparts.com/parts/2004/B ... mCallOut=2

I guess the flat piece sticking out is the shield he's talking about, but I have no clue.

Lemme know what u think.
Gaming:

Workstation:

User avatar
Harness
Da Bumble
Posts:2070
Joined:Mon Dec 10, 2007 6:13 pm

Re: Squeeking noise

Postby Harness » Wed May 29, 2013 8:26 pm

I type a bunch of shit then people go fuk themselves

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Thu May 30, 2013 9:31 am

Gaming:

Workstation:

User avatar
Harness
Da Bumble
Posts:2070
Joined:Mon Dec 10, 2007 6:13 pm

Re: Squeeking noise

Postby Harness » Thu May 30, 2013 2:21 pm

I type a bunch of shit then people go fuk themselves

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Thu May 30, 2013 5:47 pm

Aight, I'm gonna try to find out where this shit is located so I can check it out. Will report back....

BTW, I remember seeing oil in this spot yesterday when I was taking a look. Take a look at the pic I attached, then read this:
http://forums.bimmerforums.com/forum/sh ... ?t=1764546

The pic is to the left of the engine if you're facing it from the front, near the head shield for the ac line and the secondary air pump.

Also check this, as I believe this is what the shop was referring to with the VANOS oil line:
http://forums.bimmerforums.com/forum/sh ... ight=vanos

You had that off at one point when you were working on my thermostat. Maybe it's just residue.
Attachments
IMG_2355a.JPG
IMG_2355a.JPG (101.15KiB)Viewed 10478 times
Gaming:

Workstation:

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Sun Jun 02, 2013 6:08 pm

So I was able to check this shit out today and here are my findings...

This is the shield thing they were talking about located on the exhaust manifold over the back 3 cylinders. As you can see, there is oil on it:
IMG_0016.JPG
IMG_0016.JPG (1.83MiB)Viewed 10461 times


Another shot a little to the left:
IMG_0017.JPG
IMG_0017.JPG (1.24MiB)Viewed 10461 times


I wiped the oil off so that I can monitor the possible leak:
IMG_0018.JPG
IMG_0018.JPG (1.24MiB)Viewed 10461 times


This is the other shield that takes care of the front three cylinders. As you can see, no oil present:
IMG_0019.JPG
IMG_0019.JPG (1.27MiB)Viewed 10461 times


So I'm going to watch it closely and see if anything happens. I suppose we could just replace the gasket on both sections and be done with it. I don't feel like just getting the rear one done and then have the front one start leaking a month after...

And this is the VANOS oil line. I wiped some oil crud off of it but it wasn't fresh(er) like the oil on the gasket shield:
IMG_0020.JPG
IMG_0020.JPG (1.03MiB)Viewed 10461 times


Gonna monitor as well but seems like a non-issue.

This is the gasket w/ shield (#3, part 11621732969): http://www.realoem.com/bmw/showparts.do ... g=10&hl=15
I can get a set for cheap: http://www.amazon.com/Fel-Pro-MS96521-E ... B000HUK9S6
Gaming:

Workstation:

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Thu Oct 17, 2013 3:34 pm

Revisiting this again...

I try to drive my car once a week to keep things from seizing up. I'm trying to sell this ticking time-bomb but no one is buying. Anyways, when I take it out I start smelling burning oil once the engine heats up (inside the cabin). Like you saw in the previous pics, there is a considerable amt of oil on the heat shield of the exhaust manifold. Also, I noticed a good amount of steam/smoke coming out of where the O2 sensor is. Take a look at the pic. The O2 sensor and cable is covered in oil and it looks like its melting or some shit. The heat shield is once again covered in oil. What a mess.

I can clean the heat shield periodically to keep the smell at bay, but what about the steam/smoke coming from the O2 sensor? Kinda worried about that.

I'm trying to patch this car up for little to no money just to sell it. The next poor schmuck can deal with the repairs.

o2sensor1.jpg
o2sensor1.jpg (224.63KiB)Viewed 10158 times
Gaming:

Workstation:

User avatar
Harness
Da Bumble
Posts:2070
Joined:Mon Dec 10, 2007 6:13 pm

Re: Squeeking noise

Postby Harness » Fri Oct 18, 2013 12:22 pm

I see the valve cover gaskets leak on those things a lot. Very common to leak directly onto the exhaust causing it to burn.

Thats no small potato's job either.

Turn the air recirculation on so that only inside air comes out the vents. That way, only when the vent is in defrost position will it bring in that oil burning smell.
I type a bunch of shit then people go fuk themselves

User avatar
Darkfoxx
Site Admin
Posts:9666
Joined:Mon Jul 02, 2007 7:09 pm
Location:Alexandria, VA
Contact:

Re: Squeeking noise

Postby Darkfoxx » Fri Oct 18, 2013 1:10 pm

Gaming:

Workstation:


Return to “The Garage”

Who is online

Users browsing this forum: No registered users and 9 guests